The CL Free Ultra Pool System with pH management using Co2. The Ultra Pool System has the same sanitation process as the Classic pool system with one huge added benefit. Electronic pH monitoring, display and Automated pH management using Co2. A CL Free pH sensor will continually reads the pH of your pool waterand displays the actual pH of the water on the pool controller every 30 seconds. When the pool water pH rises above the setting you choose (normal pH is between 7.2 to no higher than 7.6) our system will start injecting Co2 until the pH is back to the normal setting. When you mix Co2 with water it becomes a mild form of Carbonic Acid. The Carbonic acid takes the place of having to use Muriatic acid to adjust pH down. The amount of Co2 needed is approximately 35 pounds of Co2 per 15,000 gallon pool every 6 to 8 weeks. You can get Co2 at any welding supply Company. Co2 tanks come in many sizes. The smallest size Co2 tank we recommend is a 35 pound tank. A 35 pound Co2 tank is about the same size as a skin divers tank.
Product Details
The Cl Free 'Classic Pool' system consists of three major parts:
- The Pool Controller
- The Flow Cell
- The Flow Switch
- pH Sensor
- pH Sensor Fitting
- Co2 Regulator
- Co2 Injector
- Water Test Kit
Our System maintains the Copper Ions on a DAILY basis.
The Computer Controller will only release copper ions for ONE hour in a 24 hour period or for the first hour when your pool pump starts. In order to maintain the .5 to .7 parts per million of Copper Ions you will have an unlimited number of maintenance power levels to choose from. The power level selected is based on the size (gallons) of your Pool.
